simple logwall with sealing - "tongue and groove" Features: 1. free movable 2d-view with movable hotspots - switchable 2. its possible to draw every single position of any tree-trunk at wall-beginning. 3. in ground-view there is a userinterface to switch tho ofte used settings 4. a polygon to cut contours - switchabele and free placeable 5. 10 free mavable rectangular cutouts - to place windows or else 6. sealing tongue and groove begin at wall crossingpoint 8. switch on simple measurements 9. begin with halften block or full in z-direction 10. implanted inaccuracy to get more reality in 3d-representation

ALUCOBOND® SZ20 (tongue & groove ) system = rear ventilated facade system: A recommended tray panel / cassette system for horizontal layout with unvisible fixing of the tray panel elements. ALUCOBOND® is the world market leader for aluminium composite panels. Since its introduction on the market in 1969, these panels have been used above all in architecture and for corporate identity programmes, particularly for façades, wall and roof cladding. The panels are outstanding due to their extreme flatness and rigidity and, in particular, for their excellent formability with simple fabrication techniques. ALUCOBOND® combined with a rear-ventilated construction system unites the features of energy efficient construction, economic viability and architectural quality. ALUCOBOND® is available in a large variety of colours, surfaces and formats. In terms of Fire Classification it is available in Class A2 (noncombustible) or alternatively in Class B (fire-retardant) acc. to EN 13501-1.

A rich palette of robust browns is enhanced with natural oiling and extra-deep brushing to bring out the character of the grain and highlight the natural texture of the wood, in this single-strip walnut floor from the Rugged Collection. Four-sided bevelling at the edges ensures a classic, full plank look and feel. Hand-scraping enhances the worn appearance of the floor.

Monofluid lavatory faucet on timed groove - Projection 107 mm Height under 50 mm aerator Flow rate 6 l / min under 3 bar

Washbasin mixer on timed groove - Projection 107 mm Height under 50 mm aerator Flow under 3 bars: 6 l / min

The Tork Elevation DoorMate Dispenser System is a one-at-a-time dispensing system that helps protect hands from door handle germs. The Tork Elevation Folded Bath Tissue Dispenser and the 5-liter Bin work together to create The DoorMate. Less paper is used in your restrooms, which means less waste, clutter and cost. The slim, design takes up less space, fits anywhere and it's easy to install, and refill. Seamless design means less groove for dirt to hide. The bin is a 5L container and fits any standard 5L or 1 gal plastic bag.

For applications requiring a ceiling which is mechanically secured to the structural soffit. Ecophon Focus F is installed directly to an existing plaster ceiling, boarding, battens or concrete, creating a ceiling with a smooth appearance. The bevelled edges create a narrow groove between each tile. The tiles are not demountable. The tiles are manufactured from high density, 3rd generation glass wool. The visible surface has an Akutex™ FT coating and the back of the tile is covered with glass tissue. The edges are reinforced and painted. The weight is approximately 2,5 kg/m². Ecophon recommend Connect screws for a quick and secure installation.

Caution, heavy-duty transporter! - The DXD moves virtually anything with the power of two motors. Its favourite task is moving extremely large façade windows, skylights and roof-mounted flaps under a snow load. Here it handles even the heaviest elements with precise synchronisation. It is good to know that it is available in so many different designs.   The defining characteristics of the DXD Series - Exceptionally high power and efficiency - Achieves the maximum opening in almost no time even in case of high weights - Precise synchronisation when it comes to extremely heavy elements - A large variety of designs and customised object solutions - Available as a 230 V AC SHEV solution Performance features - Can be used for openings for smoke exhaust; D+H Euro SHEV in accordance with EN 12101-2; and for daily ventilation - With integrated BSY+ motor and synchronised electronics controlled via microprocessor - Direct control via 230 V AC - High speed function (HS) for especially fast opening windows in case of fire (SHEV) - Option of up to 4 drives in one synchronous group - Groove in the drive tube for flexible installation and configuration of the swivel range - Option of cable infeed above and below - Programmable drive functions and different drive parameters - Running speed in CLOSED direction decreases to 5 mm/s (passive closing edge protection) - Time-controlled reversing when an obstacle is detected in the CLOSED direction (active closing edge protection)

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 series is the latest generation of casement windows 70mm with minimal opening and high performance thermal insulation created by Profils Systèmes. With a mass of aluminum seen extremely reduced on the opening, it offers a compromise design very attractive for professionals. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 series is the latest generation of casement windows 70mm with minimal opening and high performance thermal insulation created by Profils Systèmes. With a mass of aluminum seen extremely reduced on the opening, it offers a compromise design very attractive for professionals. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight Multipor external thermal insulation The Multipor thermal insulation composite system (ETICS) is the ideal solution for energy-efficient and sustainable insulation of exterior walls. Advantages: - Non-flammable from the base to the roof - no fire bolt - Full Mineral thermal insulation composite system - Protection against algae and fungi - without biocides - Solid and dimensionally stable - Woodpecker Safe - High compressive strength - density of up to 115 kg / m³ - physiologically harmless and 100% recyclable

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

Silka Ratio high precision units are suitable for load-bearing and non-load-bearing interior walls and the inner shell of exterior walls. As a consequence of the tongue and groove system building can be carried out fast and simple. Hand grips enable an ergonomic handling. Due to the high precision of the units Silka Secure thin layer mortar can be used. Advantages: - Higher characteristic masonry compressive strength in comparision with general purpose mortar (=> Reduction of wall thickness, gain of living space) - Fire wall starting from wall thickness 17.5 cm in gross density ≥ 1.8 - Opimized hand grips and the tongue and groove system facilitate laying units by hand up to an unit-weight of 25 kg - Lower humidity as a consequence of using Silka Secure thin layer mortar inspite of general purpose mortar (=> reduction of drying period) - Available also as perforated units mit lower weight

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock (plus) is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Verbundstein is suitable for all non-bearing, bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class P2 is ideal for walls that are optimized for thermal insulation. The quality class P4 is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity from λ = 0.11 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Silka thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

The Silka block is suitable for load-bearing and non-load-bearing interior walls as well as for the inner shell of external walls. Thanks to the equipment with a reciprocating groove and spring system, processing is quick and easy. Grip pockets ensure ergonomic work. The processing is carried out with the Ytong thin bed mortar. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - maximum sound insulation at high bulk densities - optimal summer warmth protection - optimized grips - also available as a perforated brick with a low bulk density

Standard door fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23 roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R01.230

Vacant/Engaged fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23NR roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R02.230

Fire door fitting in R-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 111.23R U-shaped made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 23 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. The lever handle meets the standards of EN 179 and DIN 18040. Roses: model 305.23... and 306.23FS roses substructure made of synthetic material-stainless steel composite, can be used for left and right-hand opening doors. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area and second journal in the neck of the lever handle. Concealed, non-loosening screwed joint with M4 screw and sleeve combination as well as the pivot disappearing into the door leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10.5 mm high, flat, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class D1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: U Article no.: HEWI 111R11.230

Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH01.130

Vacant/Engaged fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH02.130

Fire door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 111X... made of stainless steel tube (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle, for optimal transfer of force to door leaf. The lever handle meets the standards of EN 179 and DIN 18040. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class B1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 111XAH11.130

Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 162.21P... in mitre cut, made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. Roses: model 305.21P... and 306.23, composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10 mm high, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162PCH01.230

Vacant/Engaged fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH02.230

Fire door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fire door fitting with spindle 9 mm, according to DIN 18273 Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class B1 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH11.230

Vacant/Engaged fitting in B-technology with roses according to DIN 18255 and EN 1906 made of polyamide, high-polished surface, consisting of: Lever handle model 162.21P... in mitre cut, made of high-quality polyamide with corrosion resistant steel insert, solid colour, diameter 21.3 mm, with stepped shoulder guide and groove, easily installed by latching the lever handle into the base parts pre-mounted on the door. The latching can be released using the dismantling tool. Roses: model 305.21P... and 306.23NR, composite synthetic material rose substructure, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with 5 mm Spax screws as well as the pivot disappearing into the door leaf. WC version with emergency opening by means of square spindle or coin and occupancy disc (red/white indicator) on the outside. Rose cap, round, made of high-quality polyamide, solid colour, diameter 55 mm, 10 mm high, 1.5 mm wall thickness. Designed and tested for the projects segment, user category to EN 1906 - Class 2 or Class 3 Category of use: Class 2 fitting with spindle 7 mm Category of use: Class 3 fitting with spindle 8 - 8.5 mm Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 0 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162PCB02.230

Standard door fitting in H-technology with roses according to DIN 18255 and EN 1906 made of stainless steel, consisting of: Lever handle 162X... made of stainless steel tube in mitre cut (1.4301), diameter 21.3 mm with 1.5 mm wall thickness, with stepped shoulder guide and groove, with set screw M5 as additional fixing of lever and spindle for optimal transfer of force to door leaf. Installed by simply latching the lever handle into the base parts preassembled on the door. The latching can be released using the dismantling tool. Roses: model 305.21X... and 306.23X..., 305.21X... composite synthetic material and steel rose substructure with black zinc/nickel surface for optimum corrosion protection, integrated spring-assisted restraining "hold-up" module, can be used for left or right-hand opening doors, supporting the lock for longer durability. Fixed rotating bearing of the lever handle with automatically latching all-round locking and 5 mm journal as maintenance-free plain bearing with elastic compensating area, to cancel the possible mounting inaccuracies. Concealed, non-loosening screwed joint with M5 stainless steel screw and sleeve combination as well as the pivot disappearing into the leaf. Rose cap round, made of stainless steel (1.4301), diameter 55 mm, 10.5 mm high, 1.5 mm wall thickness. Surface satin finished Designed and tested for the projects segment, user category to EN 1906 - Class 4 fitting with spindle 8 - 8.5 mm Category of use: Class 4 Durability: Class 7 Door weight: No classification specified Fire resistance: Class 0 Safety: Class 1 Corrosion resistance: Class 4 Burglary protection: Class 0 Design-type: A Article no.: HEWI 162XAH01.230

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong ThermStrong block is suitable for all load bearing and bracing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - thermal conductivity λ = 0.10 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: F90-A from 7.5 cm - Economical and stable in value - Ergonomic processing

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 series is the latest generation of casement windows 70mm with minimal opening and high performance thermal insulation created by Profils Systèmes. With a mass of aluminum seen extremely reduced on the opening, it offers a compromise design very attractive for professionals. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 series is the latest generation of casement windows 70mm with minimal opening and high performance thermal insulation created by Profils Systèmes. With a mass of aluminum seen extremely reduced on the opening, it offers a compromise design very attractive for professionals. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

CUZCO® 713 Series is the latest generation of high-performance thermal insulation of casement windows manufactured by Profils Systèmes. 3 models proposed: • Euro groove • Traditional frame for renovation • 100 to 200mm single-piece frame for new built Complies with RT 2012 Eligible for the Energy Transition Tax Credit Optimized solar contributions Reduced heating and lighting costs Design Factory Spirit® medalist Preservation of tint guaranteed 25 years

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The second generation of the Janisol Arte window system now offers profiles made from stainless steel and Corten steel as well as a wide range of profiles. The integrated weatherstrip groove simplifies and speeds up fabrication. A large selection of glazing beads is also available in a variety of different materials. The wide range of opening types is ideally suited for the renovation of old windows but also for modern residential construction. With the narrowest profile face widths of only 25 or 40 mm for fixed glazing and a basic depth of 60 mm, intricate yet stable constructions with a large proportion of glass and excellent thermal insulation can be created. Design benefits: • Unit thicknesses from 20 to 47 mm • Uw value from 0.8 W/m2K • Multi-point window locking • New materials for profiles: stainless steel and Corten

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong P is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The quality class PL is ideal for walls that are optimized for thermal insulation. The quality class P is particularly suitable for applications where load-bearing capacity and sound insulation are of primary importance. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.14 W/(mK) - Homogeneous, isotropic - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing

The Ytong Thermoblock 08 is suitable for all bearing and reinforcing walls. The low dimensional tolerance and the tongue and groove profiling enable rapid processing in the thin-bed method with a joint thickness of 1 mm. The result is a high-quality and homogeneous masonry with excellent thermal insulation. Due to the low weight, aerated concrete blocks are also suitable for internal walls to be retrofitted as well as for reconstruction and renovation measures. The ecological and non-combustible material also makes the construction materials extremely safe and allows their safe use. Advantages: - Thermal conductivity from λ = 0.08 W/(mK) - Homogeneous, monolithic - without additional insulation - Provides healthy, balanced room climate - Very high fire protection level: EI90 from 7.5 cm - Economical and stable in value - Ergonomic processing